Licence to Operate a Forklift Truck, Licence to Perform Dogging and RII Work Safely at Heights (SG00009004)

About This Course

CPCCLDG3001A – Licence to Perform Dogging

RIIWHS204E – Work safely at heights

TLILIC0003 – Licence to operate a forklift truck

Delivery Location(s)

Face-to-Face training will be conducted At Ironbark Training facilities. Specifically:

  • Riverina Crane Services Pty Ltd 29-31 Moorong St, Wagga Wagga NSW 2650

Course Duration

This program is delivered as a 9 day course. If additional training days are required these can be purchased at a rate of $300 per day.

CPCCLDG3001A – Licence to Perform Dogging

Unit Descriptor

This unit specifies the outcomes required to perform slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane/ operator for licensing purposes.
This unit covers the scope of work to demonstrate competency in the application of slinging techniques, selection and inspection of lifting gear and/or the directing of the crane/ operator in the movement of the load.
This unit is based upon the National Standard for Licensing Persons Performing High Risk Work.
A person conducting dogging activities is required to hold a DG High Risk Work Licence (HRWL).

This unit requires a person to:

  • Plan a job
  • Select and inspect equipment
  • Prepare site and equipment
  • Perform Task
  • Shut down job and clean up

Pre-requisites and Licensing / Regulatory Information

There are no pre-requisites for this unit of competency. However students must be able to complete the National Assessment Instrument in accordance with the instructions and assessment requirements for that instrument. In particular, learners must have sufficient English language to complete the assessment without the use of an interpreter, assistant or any reference materials.

Legislative and regulatory requirements are applicable to this unit of competency.

This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations and meets Commonwealth, State and Territory HRWL requirements.

The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.

RIIWHS204E – Work safely at heights

This unit describes the skills and knowledge required to work safely at heights in the resources and infrastructure industries.

It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.

Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.

TLILIC0003 – Licence to operate a forklift truck

This unit specifies the skills and knowledge required to operate a forklift truck safely in accordance with all relevant legislative requirements. Competence in this unit, does not in itself result in a HRWL licence to operate this plant.

Forklift truck means a powered industrial truck equipped with lifting media made up of a mast and an elevating load carriage to which is attached a pair of fork arms or other attachments that can be raised 900 mm or more above the ground, but does not include a pedestrian-operated truck or a pallet truck.

A person performing this work is required to hold a forklift truck High Risk Work Licence (HRWL).

This unit requires a person operating a forklift truck to:

plan for the work/task
prepare for the work/task
perform work/task
pack up
Licensing/Regulatory Information
Legislative and regulatory requirements are applicable to this unit of competency.

This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations and meets Commonwealth, State and Territory HRWL requirements.

The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.

Resources To Be Provided by Student

Nil

Delivery Mode: Face to Face

Restrictions: Please note, you must be 18+ years of age for this course.

NB: Programs delivered as a skill set package comprise multiple units. While booked and paid for as a package, the units are delivered sequentially (one after another) and are not blended together, this allows a student to exit upon completion of any or all units in the package. Where a student withdraws before completion of all units, a Statement of Attainment will be issued for the completed units only. Please note, there are no refunds or discounts offered for students who do not complete the entire skill set package and we strongly encourage students to complete all units within the skillset to maximise their learning opportunity.

 

Smart and Skilled:

If you wish to apply and are eligible for funding through the NSW Smart and Skilled program, This training is subsidised by the NSW Government.

Upcoming Workshops

Name Date Time Location Spots Left Cost
Licence to Perform Dogging 27 June - 1 July 2022 08:00 am - 04:00 pm 15 Moorong Street Wagga Wagga 6 $2,100.00